2022 Toyota RAV4 Bolt Pattern Guide By Years
The bolt pattern for a 2022 Toyota RAV4 is 5x114.3 (or 5x4.5 ), indicating that each wheel has five bolts (or lugs) that are arranged circularly with a 114.3 mm (4.5 inches) diameter.
One of the simplest yet cool 2022 Toyota RAV4 mods is to replace stock wheels with bigger aftermarket options.
However, before you switch, you must know your 2022 Toyota RAV4 lug pattern to confirm compatibility with the new set of wheels. But even if the current bolt pattern of your 2022 Toyota RAV4 and the new wheels do not match, consider converting to the required scheme using the wheel adapters.
Also, new rims must sit within the wheel offset range, and the 2022 Toyota RAV4's stud must fit onto the hub bore. Use the measurements below while searching for new wheels.
A bolt pattern, or lug pattern, is a two-number system used to measure the imaginary circle (PCD) formed by the lug holes at the center of a wheel. The first number counts the holes in the wheel, while the second number indicates the pitch circle diameter in mm or inches.
A machined opening in the center of the wheel. It must be "Hub Centric" to reduce vibration.
The outer diameter of your wheel stud threads in either metric (M12, M14, etc.) or standard units (1/2", 9/16", etc.).
Wheel Adapters - See more
Change a Wheel Bolt Pattern
8x165.1 to 8x170 (8x6.5 in to 8x6.7 in)
Ryin 1.5
-
Advantages:
-
Forged 6061-T6 Aluminum Alloy material, High-quality pre-installed heat treated 12.9-grade studs, enhances the strength of the wheel spacers.
-
CNC automatic processing ensures high accuracy and stability(0.02mm), you are getting the highest quality of wheel spacers that is tough, stable and safe.
-
Solve wheel fitment issues especially when change bolt pattern.
VLAOSCHI 8x6.5 to 8x170 Wheel Adapters 2
-
Benefits:
-
Each of our wheel adapters are built to last!
-
Made from the best true T-6 billet aluminum.
-
The studs of our spacers are grade 12.9, heat treated and hardened heavy duty studs for safety.
VLAOSCHI 8x6.5 to 8x170 Wheel Adapters 1.5
-
Adapts 8x170 Rims onto 8x6.5 Trucks.
-
They are designed to move the wheel further out from the hub, gives your vehicle a more aggressive stance, allow for better handling characteristics & increases driving stability.
EZAccessory 2 Wheel Adapters 8x6.5 to 8x170, 2"
-
Product Specifications:
-
-
- Vehicle Bolt Pattern: 8x6.5 inch (8x165.1mm)
-
- Wheel Bolt Pattern: 8x170mm
-
- Studs Thread Size: 14x1.5
-
- Hub Bore Size: 125mm
-
- Thickness: 2-inch (50mm)
-
- Torque: 95 ft-lbs
VLAOSCHI Black Forged 8x6.5 to 8x170 Wheel Adapters / 1.5 inch
- VLAOSCHI wheel adapters are made from FORGED 6061 T6 aerospace aluminum, CNC precisely machined, and undergo an anodizing process to prevent surface corrosion and rust, with pre-installed heat-treated 10.9-grade carbon steel studs. These wheel adapters change bolt pattern, allow for installing 8 lugs 170mm rims onto an 8 lug 165.1mm vehicle, designed to move the wheel further out from the hub, give your vehicle a more aggressive stance, allow for better-handling characteristics & increase driving stability; Mount larger wheel or tires, eliminating wheel/tire rubbing instantly.
DCVAMOUS 8x6.5 to 8x170 Wheel Adapters
-
These wheel adapters are made of aerospace alloy aluminum 6061, T6 treatment, precision CNC machined, hard oxidation finished surface.
-
- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.
- - For some special vehicles, the stock lug studs are longer than the adapter or the lug studs of the adapter are shorter to hold the wheel, please contact us the first time to return or replace the adapter.
Supreme Suspensions - 2pc Set Of 1.5" Wheel Adapters
-
These wheel adapters are designed to CHANGE the stock bolt pattern to an 8 x 6.5" (8 x 165.1mm) bolt pattern, allowing you to switch bolt patterns and install custom rims and tires. Positions your wheels 1.5 inches outward to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance.
-
*We recommend the use of a Torque Wrench to ensure proper tightening of hardware*
Supreme Suspensions - 2pc Set of 2" Wheel Adapters
-
Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage.
-
Single Rear Wheel Only. Does NOT fit models with a DUALLY setup. Please note that these wheel adapters will CHANGE your vehicle's bolt pattern and are intended for use only with 8 x 165.1mm (8 x 6.5") wheels.
HHCSOP Wheel Adapters 8x6.5 to 8X170
- Provide additional clearance between the wheel and hub assembly, thereby improving the vehicle's performance in terms of handling and traction. It will make your vehicle more stable and allow lift/lowering kits and larger traction tires to be installed.
- Forged from 6061-T6 aluminum alloy, CNC is automatically machined to ensure high precision and stability, with anodized and heat-treated surfaces to enhance corrosion resistance and comes with 10.9-grade premium studs.
8x165.1 to 8x180 (8x6.5 in to 8x7.1 in)
DCVAMOUS 8x6.5 to 8x180 Wheel Adapters 1.5
-
Usage:
-
Change bolt pattern, adapts 8x180 wheel onto a 8x6.5 vehicle.
-
Give your vehicle that aggressive stance, eliminate rubbing, mount a larger wheel or tire, clear breaks or struts.
- They also increase your vehicles handling performance due to adding trek and width to your stance.
EOTH 1.5
-
Benefits:
-
Solve wheel fitment issues especially when change bolt pattern.
-
Allow you to use bigger tires.
-
Customize the offset of your rims and Give you the custom aggressive look.
VLAOSCHI 8x6.5 to 8x180 Wheel Adapters 2
-
Features:
- VLAOSCHI wheel adapters are made from FORGED 6061 T6 aerospace aluminum, CNC precisely machined, undergoes anodizing process to prevent surface corrosion and rust, with pre-installed heat treated 10.9 grade carbon steel studs.
Supreme Suspensions Wheel Adapters For Truck. 2" Thickness
-
COMPATIBLE WITH 2000 - 2010 Chevrolet Silverado 2500HD / 3500HD (2WD 4WD) and 2000 - 2010 GMC Sierra 2500HD / 3500HD (2WD 4WD). *Does NOT fit models with DUALLY setup. Please note that these wheel adapters will CHANGE your vehicle's bolt pattern and are intended for use only with 8 x 180mm wheels.
-
T6 BILLET ALUMINUM WHEEL ADAPTERS (4-PIECE SET): 2 Inches Thick, M14x1.5 Studs, 130mm Center Bore Without Lip | NOTE: Spacers are lug-centric, and centered using the precision machined taper seat on the lug-nuts.
DCVAMOUS 2PC 8x6.5 to 8x180 Wheel Adapters, 2 Inch Thick
- Change the bolt pattern, and adapt the 8x180 wheel onto an 8x6.5 vehicle. Give your vehicle that aggressive stance, eliminate rubbing, mount a larger wheel or tire, and clear breaks or struts. They also increase your vehicle handling performance due to adding trek and width to your stance. With grade 10.9 studs and lug nuts, the complete kit comes with everything needed for a complete installation.
ZHTEAPR 8x6.5 to 8x180 Forged Wheel Adapters (1.5 inch)
- These wheel adapters are made from FORGED 6061 T6 aerospace aluminum, CNC precisely machined, with pre-installed heat treated 10.9-grade carbon steel studs. These wheel adapters will change your vehicle's bolt pattern and are intended for use only with 8 x 180mm wheels.
ZHTEAPR 8x6.5 to 8x180 Forged Wheel Adapters (2 inch)
- Wheel adapters are an important accessory for any vehicle with wheels that have different bolt patterns. They allow the driver to mount a wheel from one vehicle onto another, making it easier to replace or customize wheels. Wheel adapters also make it possible to use larger wheels on smaller vehicles, allowing drivers to upgrade their vehicles without having to buy new wheels or tires. Additionally, wheel adapters can be used to fit larger tires onto a vehicle for off-roading and other types of driving.
RSOXTECH 8x165.1 to 8x180 Wheel Adapters
-
Product Benefits:
-
-
- (I) CNC automatic processing ensure high accuracy and stability.
-
- (II) 6061-T6 aluminum forged alloy material.
-
- (III) High-quality pre-installed heat treated 10.9-grade studs.
-
- (IV) Zinc plating studs for better antirust effect.
-
- (V) Change bolt pattern, adapt 8x180 wheel onto the 8x6.5 vehicle
-
- (VI) Provides increased wheel and tire clearance.
ECCPP Wheel Adapters
- Made from the best true T-6 billet aluminum, with heat-treated and hardened 10.9-grade bolts pre-installed.The anodized surface provides additional resistance to corrosion. Exceptionally sturdy and lightweight compared to steel spacers. Required that you Recheck your vehicle compatibility in the Product Description BEFORE buying
8x165.1 to 6x139.7 (8x6.5 in to 6x5.5 in)
EZaccessory 2" Wheel Adapters
-
These two piece conversion type wheel adapters are used to convert 8 lug vehicle with 6.5"" (165.1mm) bolt pattern to fit wheels with 6 lug 5.5"" (139.7mm) bolt pattern. They will space out your wheels for 2-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a set of 4 for all four wheels.
-
Important:They do NOT work on manual or locking hubs. These hubs usually stick out a few inches and will protrude outside the inner piece adapter; thus not allowing the outer piece adapter to be installed.
EZAccessory 2 Wheel Adapter 8x6.5 to 6x5.5
- These two piece conversion type wheel adapters are used to convert 8 lug vehicle with 6.5"" (165.1mm) bolt pattern to fit wheels with 6x5.5" (139.7mm) bolt pattern. They will space out your wheels for 2-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels.
8x165.1 to 8x200 (8x6.5 in to 8x7.9 in)
EZAccessory 2 Wheel Adapters 8x6.5 to 8x200
- Adapters will give you widened stance as well as stability. If vehicle studs protrude outside the adapters, you may need to shave down vehicle studs.
- Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance.
8x165.1 to 8x210 (8x6.5 in to in)
EZAccessory 4 Wheel Adapters 8x6.5 to 8x210 / Thickness 2 Inch
- This wheel adapter is perfect for modifying your vehicle to fit different-sized wheels. It is constructed of high-quality materials, making it exceptionally strong and durable. The design features a unique adjustment system that allows for easy installation with minimal effort, enabling you to change the size of your wheels quickly and conveniently.
Wheel spacers - See more
2,5 inch / 63 mm
Customadeonly 8x6.5 Wheel Spacers
- Designed to improve the handling & appearance of your vehicle
- Made with high grade T-6 Aluminum - CNC machined with precised fit -Suggested Torque Setting: 95-100 lbs
- Carbon steel wheel studs- machine pressed (Extremely durable)
- Fit Vehicles With Bolt Pattern: 8x6.5 (8x165.1), Thread Pitch: 14x1.5 & Center Bore: 117mm.
- Suggested Torque Setting: 95-100 lbs.
Lug nuts - See more
Keep tires attached to the hub
This 1707S Bulge Acorn Lug Nut is your one-stop solution for aftermarket chrome lug nuts. The heat-treated, cold-forged steel construction provides a reliable replacement and is supplied to...
Check price on
White Knight has established a solid reputation of providing the automotive aftermarket industry with quality products at competitive prices. White Knight lug nuts are constructed to enhance...
Check price on
Specifications: M12x1.50 Thread pitch, 4.4” Overall height, 0.92” Diameter, 60-degree Conical Seat, Bulge Acorn design, anti-theft spline design. Chrome Finish.
Precision-machine...
Check price on
Crafted from premium-grade iron, these lug nuts are designed to provide long-lasting durability and strength. Their gold finish not only adds a touch of elegance to your vehicle, but it also...
Check price on